To install the VMWare EXSi host driver, you should use the esxcli utility to install following packages.

1. Install the programmable LED, USB power control driver packages

1.a. Install the programmable LED package.
# esxcli software vib install -v /tmp/DA820PLED.vib

1.b. Install the USB power control pacakge driver
# esxcli software vib install -v /tmp/DA820USB.vib

1.c. Install the watchdog driver
# esxcli software vib install -v /tmp/V2100WDT -f

2. Check the package list

2.a. Check the DA820PLED package installation.
# esxcli software vib list|grep DA820PLED

2.b. Check the DA820USB package installation.
# esxcli software vib list|grep DA820USB

2.3. Check the watchdog package installation.
# esxcli software vib list|grep V2100WDT

3. Remove a pacakge

If you don't need a package, you can use this command to uninstall it.
For example, to uninstall the DA820PLED package.
# esxcli software vib remove -n DA820PLED
